Automatic sandblasting machine

新闻资讯

News Center

current position: Home > News Center > Company news

NEWS CENTER

主要制造销售各种环保型全自动智能喷砂机、非标定制喷砂机、抛丸机、液体喷砂机、喷砂房,智能环保除尘等设备

Operation and maintenance of automatic sandblasting machine

2023-08-03 14:06:43
times

The operation and maintenance of automatic sandblasting machine, there are some maintenance and maintenance skills in the use of automatic sandblasting machine. In order to ensure the normal operation of the machine in daily use, maintenance and maintenance need to be carried out from time to time. The operator should follow certain operating procedures to ensure the extension of the service life of the sandblasting machine.


First of all, formulate the rules and regulations of operators. 1. Collect dust once every 4-8 hours, turn off the power switch, push and pull the oscillation valve for 1-2 minutes, so that the dust can be shaken off the dust bag, and then open the cover plate at the bottom of the dust box with the container to unload the dust. 2. Maintenance once a month, replace the wearing parts (rubber gloves, sand blast pipe).


Second, check whether the automatic sandblasting machine is damaged and connected to the safety socket!


Third, when the automatic sandblasting machine is operating, it is necessary to dispatch the pressure valve to control the air pressure entering the spray gun, and the working pressure can be in the range of 2.8-7Bar.


When working intermittently after four shifts, the automatic sandblasting machine and lighting power supply should be turned off.


The above are the daily operation and maintenance of the automatic sandblasting machine, and the operators should operate according to the above points during use to extend the service life of the machine.



自动喷砂机


Recently Viewed:

Related products

news.related_news