The automatic sandblasting machine can mark the surface of the workpiece, such as eliminating all waste, and produce a crucial basic graph on the surface of the workpiece (in short, the general rough), and can replace the surface of the electronic parts according to the need to remove the hot stamping on the surface of the finished product, clean the surface etching treatment of porcelain electric heating materials: Precious metal decoration, SPAR, laminated glass, marble, stone seal, porcelain, wood and other surface decoration etching treatment fluid; Crafts ground stress removal production and processing: aviation parts cleaning and in-situ stress relief or national defense safety dressing matting weapons equipment rust processing in addition to mold production and processing: mold surface pear-shaped production and processing of sand sand and frosting solutions, improve the mold movement, shoe molding, conductive rubber mold, tire mold and electronic equipment mold cleaning and gri...

Cause one: too much sand, causing blockage can not be pressurized.Solution: Use the right amount of sand, not too much.Cause two: The spray gun is blocked.Solution: After stopping the gas, take off the nozzle and see if there is a foreign body. If there is a foreign object, just clean it up.Cause three: The sand pipe is blocked.Solution: After stopping the gas, remove the nozzle, open the sandblasting machine, and blow out the foreign matter with high pressure gas. If there is no effect, it is necessary to remove the pipeline for cleaning or replacement.Reason four: The sand is wet.Solution: Clean the spray gun nozzle, dry and filter the sand.Cause five: There is no filter, resulting in a large number of foreign bodies or sand into the sand valve. How about an automatic sandblasting machineSolution: Open all the sand regulating valves, use forced air to remove foreign matter or caked sand, if this does not work, only remove the sand, re filter, and then add.Reason six: Too little sandS...

The utility model aims to provide an automatic sandblasting machine to solve the problem that the sandblasting machine can not classify the sandblasting and waste sandblasting, and the product can not be turned over and sandblasting.Several factors to ensure the high productivity of automatic sandblasting machinesThe surface spraying work is mainly completed by the automatic sandblasting machine, and it is necessary to ensure the orderly sandblasting work in order to achieve mass production. There are many kinds of machines, among which the higher the degree of automation of the machine, the less labor, the more it can create higher profits in a shorter time. There are several reasons for its high productivity.First of all, the feeding and unloading are carried out automatically and methodically, and the personnel involved in production only need to ensure that the feeding is continuous. Because there is no dust, the cleaning process is easy and not easy to clog. With drying system, st...