Due to the factors of the use scenario, it is easy to cause static electricity of the sandblasting machine, reduce the use efficiency of the equipment, and seriously damage the equipment. Therefore, in order to ensure the safety of users, the following describes how to prevent static electricity of the equipment.
Due to the weather, there are more and more inquiries for the removal of static electricity from the sandblasting machine, and now I give you some suggested methods, hoping to have some substantial help for the majority of users.
1. The automatic sandblasting machine promotes the organization of electrostatic ion rods, which can produce a large number of positive and negative charges, which can neutralize the charge on the object. When the charge on the surface of the object is negative, it will attract the positive charge in the rotation, and when the charge on the surface of the object is positive, it will attract the negative charge in the rotation, so that the static electricity on the surface of the object is neutralized and the purpose of static electricity is achieved
2. The automatic sandblasting machine lifts the electrostatic plasma wind knife. The ionic wind knife can produce a large amount of gas containing positive and negative charges, which is blown out by the shrunk gas, which can neutralize the charge on the object. When an object's surface charge is negative, it attracts positive charges in the cyclone. When the charge on the surface of the object is positive, it will attract the negative electricity in the cyclone, so that the static electricity on the surface of the object is neutralized, and the purpose of static electricity is achieved. Rapidly shrinking air can also blow stubborn dust away from objects.
3. Automatic sandblasting machine to enhance plastic materials, plastic sheet material to remove static electricity can also play a particularly good effect. Abrasive parts of the sandblasting machine should be made of wear-resistant plastic materials as far as possible, which can not only remove static electricity, but also improve the service life of the sandblasting machine
4. Automatic sandblasting machine using wet test sandblasting process, wet test sandblasting process can remove static electricity, natural use of the process must be suitable for wet test sandblasting process of the commodity process.
5. The automatic sandblasting machine lifts the ground wire. Lifting the ground wire on the sandblasting machine spray gun and the main machine helps the sandblasting machine remove static electricity, but the effect is not very good
6, the automatic sandblasting operation hand to lift the metal ring buckle, when the sandblasting manual sandblasting operation, in the operator's hands wear metal ring buckle, which can also play a role in removing static electricity.
The static electricity of the sandblasting machine is not dangerous, but the weather is dry, most customers will be nervous when they encounter such problems, as long as the early preparation is sufficient, the static electricity will stay away from you.
Sand blasting machine manufacturers
